These corrugated roof brackets hold solar rails on corrugated metal and galvanised steel roof sheeting. Corrugated Roof Solar Mounts suit homeowners, farms, smallholdings and solar installers across South Africa. They’re the solar brackets for corrugated roof sections where tile hooks or IBR fixings won’t fit.
Why Corrugated Roof Solar Mounts Suit Sheeting
Sheet metal roofs need a different fixing from tiled roofs. These solar panel roof mounts screw onto the sheeting and give each rail a fixed base.
- Fits corrugated metal and galvanised steel roofs.
- Carries P2000 rails in 3.2m and 6.4m lengths.
- Ships nationwide in 2 to 5 working days.
Fitting Solar Panel Mounting Brackets Corrugated Roof
Roof leaks are the first worry when you mount solar panels on older sheeting. Screw through the crest of each corrugation, never the valley, so rainwater runs past the fixing.
Put a sealing washer under every screw head before you tighten it. Where you can, fix into the purlin below rather than into the sheet alone. That gives each screw more material to grip than thin sheeting.
Mark the purlin lines with chalk before you drill a single hole. Drill only where a mount will sit, and seal any spare hole straight away. If you’d rather stay off the roof, book our solar installation service instead.
Spacing depends on panel size, purlin layout and site wind load. Your installer checks it against SANS 10160-3, which covers wind actions on structures. Count the purlins first, then order the solar panel mounting brackets corrugated roof rows need.
Compatibility And Fit On Corrugated Sheeting
Each mount fixes to the sheeting with the 14mm x 22mm stitching screws from our range. The mount then carries the P2000 3.2m mounting rail or the 6.4m length for longer rows. Rails bolt on with M8 x 30mm galvanised steel bolts and washers.
Panels clamp down with Solar Mid Clamps and Solar End Clamps on the rail. Longer rows join two rails with the Solar Panel Rail Link. Compare every length in our solar panel rails range before you order.
IBR And Tile Roofs
IBR and tile roofs need a different bracket from these mounts. Those roofs use the IBR Solar Brackets or Solar Panel Mounting Brackets instead. See every roof type in our Mounting Brackets range to match your roof.
Best Use Cases Across South Africa
Farms get the most from these mounts on sheds, workshops and barns. Those roofs often carry off-grid arrays that run pumps and tools. Solar installers keep these solar panel installation brackets on hand for quoted corrugated jobs.
- Farm sheds and barns with off-grid arrays.
- Homes on older corrugated iron roofs.
- Smallholding workshops running pumps and tools.
Homeowners on older corrugated roofs need a mount that holds the rail without bending the sheeting. Fixing on the crest and into the purlin spreads that load. That’s standard practice for any corrugated metal roof solar mount.
Warranty Compliance And Trust
No product certification is listed for these mounts, so we never call them certified. The SS in the SKU isn’t a confirmed material grade, so we make no stainless steel claim.
Under SANS 10142-1, exposed metal in the PV installation must be earthed and bonded, mounts included. A registered person issues the Certificate of Compliance under the Electrical Installation Regulations. That certificate isn’t supplied with the mounts.
Orders leave with nationwide delivery in 2 to 5 working days. Solar Panel Energy adds free quotes and system sizing to every enquiry. We confirm warranty terms before you order, and each order line includes the following.
- Mounts for corrugated metal or galvanised steel roofs.
- Rails, clamps, bolts and stitching screws sold separately.
Get free advice on solar panel brackets for corrugated roof layouts with every order. Order your Corrugated Roof Solar Mounts today for delivery in 2 to 5 working days.
Last Updated: October 2026
