The Solar Distribution Board 5kW is a solar AC distribution box that protects and routes inverter output. Across South Africa, homeowners, small businesses and solar installers use it to keep backup circuits safe.
You’ll find it in our Combiner Box Solar range, alongside the DC string boxes. Below, we explain how to connect inverter to distribution board circuits the right way.
Why Choose The Solar Distribution Board 5kW
Every protection part for the AC side sits in one enclosure. It works like an ac combiner box for solar backup circuits, which keeps the inverter wall neat.
Installers often call it a solar db board. Either way, it’s a surge protection distribution board that’s ready to mount beside the inverter.
- Breakers, earth leakage and surge protection arrive prewired in one box.
- Manual changeover switches backup circuits between grid and inverter supply.
- Ready layout saves installers time and labour on site.
How The Wiring Flow Works
Here’s how power moves from the inverter to your circuits. Most guides skip this step, yet it decides how well backup power behaves.
Inverter To Backup Loads
Inverter AC output lands on the board’s breakers first. From there, power feeds the essential load circuits you picked for backup.
Grid supply runs through the manual changeover switch. Flip it, and those circuits move between grid and inverter power.
Inside The AC Combiner Box
Earth leakage protection trips on fault current, while the surge device shields equipment from voltage spikes. Non-essential loads, like a geyser or stove, stay on the main DB.
A pre wired distribution board gives your electrician a clean, ordered starting point. Only the inverter, grid and load cables still need landing.
Compatibility And Fit With Inverters
Pair it with any 5kW hybrid or grid-tied inverter, such as the Deye 5kW hybrid inverter. Lithium or gel batteries behind the inverter suit it, as do standard 5kW PV arrays. PV strings need a DC combiner instead, such as the Solar Combiner Box 2 String.
Best Use Cases For This Board
- Homeowners wanting backup circuits that switch cleanly.
- Small businesses protecting tills, lights and routers from surges.
- Installers handling new 5kW hybrid or grid-tied installs.
This board suits installers on a new inverter install, where loose home-made boards often fail CoC inspections. Check that your inverter is single phase and no larger than 5kW.
That way, its 25A and 32A breakers match the output before you wire essential loads. Mount the board close to the inverter so the AC cable run stays short.
Warranty Compliance And Trust
Wiring rules apply to every inverter board in South Africa. SANS 10142-1: the board must be wired and installed to the national wiring code.
You need a Certificate of Compliance (CoC) from a registered electrician after the AC work is done. Grid-tied or hybrid systems must be registered with the municipality or Eskom as SSEG.
For a complete setup, our solar installation team sizes backup circuits to your load. Spare breakers and surge devices sit in our AC and DC protection devices range.
We offer nationwide delivery in 2 to 5 working days. Collect stock instead from Midrand, Bloemfontein, Cape Town, Durban or Gqeberha. Payment is by secure EFT or Visa card.
What Is Included
- 25A and 32A double pole AC breakers.
- Earth leakage protection unit.
- AC surge protection device.
- Manual changeover switch.
- Waterproof, dustproof 12 way db board enclosure.
Our team checks inverter fit for free before you buy. Order the Solar Distribution Board 5kW today and give your 5kW inverter a protected AC side.
Last Updated: October 2026












